Services

ooobongooo · 06-09-2009, 07:13 AM

-=-Hitachi -=- Benq -=- Samsung -=- Liteon -=-

Now flashing all 360 drives to iXtreme 1.6 for $20 + return shipping

I offer firmware recover service. I have a SMD hot air station. I am able to remove TSOP chips from drives.

Basically if you fried your drive or messed it up somehow, I will recover the firmware off the drive for you. I can do this only for Samsung or Hitachi drives. I can just send you your firmware file or replace it with another drive or if its a Samsung put it on a new Samsung PCB and just put that in your drive. Most times I can recover the firmware as long as the person attempting the mod didn't write over the firmware. Service will vary in cost depending on what you need done.

I cannot recover firmware from a Benq or Liteon. I can replace them if the firmware is still readable from drive, but if you bricked your Liteon and did not get the firmware you are, well basically screwed.

I keep Benq and Samsung drives in stock on a normal basis so if you need a new drive I offer replacements. I usually use these drives for people who need a new drive due to dying lasers or motors or they screwed their drive up.

If you have any questions about any drive you messed up or just need normal 360 flashing service feel free to ask. I do not do RROD fixes. I only do DVD drive fixes. I also have Kreon drives flashed to SH-D163B Kreon 1.0 for $40

davewb · 06-09-2009, 04:16 PM

How much for updating my drive ti 1,6, I think I have 1.4.

ooobongooo · 06-09-2009, 10:03 PM

Quote:

Originally Posted by davewb

How much for updating my drive ti 1,6, I think I have 1.4.

$20 + return ship for all 360 flashes.

bigdun69 · 06-21-2009, 10:46 PM

i think i am in need of a new samsung drive.... i flashed mine , and did a bad flash. any way u can get the org. firmware back on? i did not have a key or anything when i did it. Can u plz help ??? email bigdun69@yahoo.com

ooobongooo · 06-29-2009, 02:19 PM

BuMp BuMp BuMp
BuMp BuMp BuMp

drbob · 07-03-2009, 12:19 AM

The laser in my Benq has died and I need another drive, Can you help me out?

06-09-2009, 07:13 AM	#1 (permalink)
ooobongooo Senior Member Join Date: May 2008 Posts: 1,082 Reputation: 54 *cBay Rating:*	XBOX 360 Drive modding iXtreme 1.6 - drive recovery - drive swaps - drive replacement -=-Hitachi -=- Benq -=- Samsung -=- Liteon -=- Now flashing all 360 drives to iXtreme 1.6 for $20 + return shipping I offer firmware recover service. I have a SMD hot air station. I am able to remove TSOP chips from drives. Basically if you fried your drive or messed it up somehow, I will recover the firmware off the drive for you. I can do this only for Samsung or Hitachi drives. I can just send you your firmware file or replace it with another drive or if its a Samsung put it on a new Samsung PCB and just put that in your drive. Most times I can recover the firmware as long as the person attempting the mod didn't write over the firmware. Service will vary in cost depending on what you need done. I cannot recover firmware from a Benq or Liteon. I can replace them if the firmware is still readable from drive, but if you bricked your Liteon and did not get the firmware you are, well basically screwed. I keep Benq and Samsung drives in stock on a normal basis so if you need a new drive I offer replacements. I usually use these drives for people who need a new drive due to dying lasers or motors or they screwed their drive up. If you have any questions about any drive you messed up or just need normal 360 flashing service feel free to ask. I do not do RROD fixes. I only do DVD drive fixes. I also have Kreon drives flashed to SH-D163B Kreon 1.0 for $40

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modded 3rrod xbox 360 with Hitachi Drive	ShadowLegion88	Chit Chat	14	05-25-2009 08:31 AM
FS Kreon Drive XBOX 360	krupprecht	Sell/Trade Forum	0	02-18-2009 11:40 PM
Xbox 360 Modding (Lite-On Drive) Help	Santram	Gaming	9	02-05-2009 01:35 AM
XBOX 360 modding All drives, except new liteon drive which noone can mod ATM	ooobongooo	Services	11	08-21-2008 10:55 PM
FS Used Xbox 360 Pro With 20gb Hard Drive and HDMI Port	Dr. Lolicon	Sell/Trade Forum	10	08-16-2008 08:13 PM

06-09-2009, 04:16 PM	#2 (permalink)
davewb Junior Member Join Date: Jun 2009 Posts: 4 Reputation: 0 *cBay Rating:*	How much for updating my drive ti 1,6, I think I have 1.4.

06-21-2009, 10:46 PM	#4 (permalink)
bigdun69 Junior Member Join Date: Jun 2009 Posts: 1 Reputation: 0 *cBay Rating:*	i think i am in need of a new samsung drive.... i flashed mine , and did a bad flash. any way u can get the org. firmware back on? i did not have a key or anything when i did it. Can u plz help ??? email bigdun69@yahoo.com

06-29-2009, 02:19 PM	#5 (permalink)
ooobongooo Senior Member Join Date: May 2008 Posts: 1,082 Reputation: 54 *cBay Rating:*	BuMp BuMp BuMp BuMp BuMp BuMp

07-03-2009, 12:19 AM	#6 (permalink)
drbob Junior Member Join Date: Jul 2009 Posts: 1 Reputation: 0 *cBay Rating:*	The laser in my Benq has died and I need another drive, Can you help me out?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Sponsored Links

Services

This is a discussion about XBOX 360 Drive modding iXtreme 1.6 - drive recovery - drive swaps - drive replacement within the Services section, where you will Selling a service for botting or anything similar? Sell your service here!