[MattG]

Xbox 360
How to mod on Halo 2 without voiding your Warranty.

Items required:
1.Xbox 360
2.Xsata (You can purchase from Codejunkies.com or Ebay.com)
3.Computer
4.Halo 2

1.
Once you have purchased Xsata, follow instructions included to connect it to Xbox 360, and install Xplorer 360 on your computer, which is included on a Mini Disc.
2.
Now that Xsata is installed on your Xbox 360, and Xplorer360 on your computer its time to access your HDD and Find your Halo 2 Maps.

When you start Xplorer 360 and access your HDD you will see,
Partion 1
Partion 2
Partion 3
First you must backup your HD like shown below, In case you mess up.

Now that your HDD is backed up its time to find your maps.
Go to Partion 3,
Compatibility,
Xbox1,
Tdata,
4D530064,
$c,
And inside these three folders you will find your 9 Maps.

Now, I am going to teach you how to put a racetrack on containment, and put it on your Xbox 360.

Items Needed:
1. Have Completed Everything Above.
2. Download SPPF Here http://files.halomods.com/download.php?id=48948
3. Download Containment Race Track (You can find a lot of them at http://files.halomods.com/ or here is one) http://files.halomods.com/download.php?id=51989
4. Download WinRar Here http://www.rarlab.com/rar/wrar351.exe
5. Download A Map Resigner Here ( www.halomaps.com) Look For CMR, under Xbox Programs.
Now, Go to the location of your maps on your hard drive, and extract the containment map. Then open Super PPF, and on the bottom,
open your map (Containment),
and then select the patch (Racetrack),
Hit Apply,
Then use CMR to resign the map.
And you are now finished, just move it back to your HDD.
Enjoy.