Gaming

Shadowlink · 07-18-2008, 05:29 PM

Anyways, for some reason, every time I put this on, It freezes with a black screen after the namco Bandia logo, Anyone know what the problem is, I have CFW 3.90 M33-3, Thanks.

krackhead · 07-18-2008, 05:41 PM

try renaming it. or try convert it from iso to cso or cso to iso. and try to change the region and umd thingy

Shadowlink · 07-18-2008, 05:43 PM

nvm, I got it to work, thanks anyways Krackhead, I might do that if it has the problem, Chewy you can close this thread

Shadowlink · 07-19-2008, 06:32 PM

NVM it stopped working

, Krackhead what you told me didn't work.

aznbadboi · 07-19-2008, 06:37 PM

wat format is it in. Iso or cso. If cso check wat lvl compression it's in. google around see if anybody having the same problem.

Shadowlink · 07-19-2008, 06:39 PM

It's a CSO, I don't know what level, but only some people had the problem, and no one had a solution.

christafa.milla · 07-19-2008, 06:49 PM

most likely it was a bad rip or you might of had an interruption while downloading. download it again then go from there. good luck

krackhead · 07-19-2008, 07:15 PM

are u running version 3.90 or 1.50? try taking the battery out of your psp and put it back again and hold R while turning it on and change it to 1.50 or 3.90

i have the game running fine on my psp. and i used
Sony NP9660-NO UMD-
FAKE REGION: EUROPE
FREE UMD REGION: ENABLED

jpang · 07-19-2008, 07:19 PM

Quote:

Originally Posted by krackhead

are u running version 3.90 or 1.50? try taking the battery out of your psp and put it back again and hold R while turning it on and change it to 1.50 or 3.90

that won't make a difference, only for homebrew.

what cpu speed are you running on? i remember r&c didn't run if the cpu speed was default

krackhead · 07-19-2008, 07:22 PM

His region was set to the wrong one or the fake umd was set to the wrong one. that's the only thing that can cause a game to stop loading.

Quote:

Originally Posted by jpang

that won't make a difference, only for homebrew.

what cpu speed are you running on? i remember r&c didn't run if the cpu speed was default

it does on some game.
im running 333 mhz

Shadowlink · 07-19-2008, 07:56 PM

LMAO thanks for all the help guys but for some reason I was supposed to press start when the black screen comes, that is pretty stupid but thanks +rep

07-18-2008, 05:29 PM	#1 (permalink)
Shadowlink Senior Member Join Date: Dec 2007 Location: California Posts: 2,088 Reputation: 24	Naruto 2 PSP not working(Need Help) Anyways, for some reason, every time I put this on, It freezes with a black screen after the namco Bandia logo, Anyone know what the problem is, I have CFW 3.90 M33-3, Thanks.

07-18-2008, 05:41 PM	#2 (permalink)
krackhead Senior Member Join Date: Dec 2007 Location: heaven Posts: 4,602 Reputation: 67	try renaming it. or try convert it from iso to cso or cso to iso. and try to change the region and umd thingy __________________ Who says you can't trust a krackhead? Seller Feedback Buyer/Trader Feedback

07-19-2008, 07:15 PM	#8 (permalink)
krackhead Senior Member Join Date: Dec 2007 Location: heaven Posts: 4,602 Reputation: 67	are u running version 3.90 or 1.50? try taking the battery out of your psp and put it back again and hold R while turning it on and change it to 1.50 or 3.90 i have the game running fine on my psp. and i used Sony NP9660-NO UMD- FAKE REGION: EUROPE FREE UMD REGION: ENABLED __________________ Who says you can't trust a krackhead? Seller Feedback Buyer/Trader Feedback

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dbn bot not working	xodenon	Club Live	10	07-02-2008 11:20 PM
XP not working.	Thrashmetal1989	Hardware Hangout	20	02-29-2008 07:49 PM
Moola not working?	macroman	General Discussion of Networks/Survey Sites	7	12-19-2007 09:06 PM

07-18-2008, 05:43 PM	#3 (permalink)
Shadowlink Senior Member Join Date: Dec 2007 Location: California Posts: 2,088 Reputation: 24	nvm, I got it to work, thanks anyways Krackhead, I might do that if it has the problem, Chewy you can close this thread

07-19-2008, 06:32 PM	#4 (permalink)
Shadowlink Senior Member Join Date: Dec 2007 Location: California Posts: 2,088 Reputation: 24	NVM it stopped working , Krackhead what you told me didn't work.

07-19-2008, 06:37 PM	#5 (permalink)
aznbadboi Senior Member Join Date: Apr 2008 Posts: 351 Reputation: 17	wat format is it in. Iso or cso. If cso check wat lvl compression it's in. google around see if anybody having the same problem.

07-19-2008, 06:39 PM	#6 (permalink)
Shadowlink Senior Member Join Date: Dec 2007 Location: California Posts: 2,088 Reputation: 24	It's a CSO, I don't know what level, but only some people had the problem, and no one had a solution.

07-19-2008, 06:49 PM	#7 (permalink)
christafa.milla Senior Member Join Date: Jun 2008 Posts: 555 Reputation: 55	most likely it was a bad rip or you might of had an interruption while downloading. download it again then go from there. good luck

07-19-2008, 07:56 PM	#11 (permalink)
Shadowlink Senior Member Join Date: Dec 2007 Location: California Posts: 2,088 Reputation: 24	LMAO thanks for all the help guys but for some reason I was supposed to press start when the black screen comes, that is pretty stupid but thanks +rep

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Gaming

This is a discussion about Naruto 2 PSP not working(Need Help) within the Gaming section, where you will Chat about anything gaming related here.