Thread: UniBot A Complete Walkthrough

Results 1 to 5 of 5
  1. #1 UniBot A Complete Walkthrough 
    Junior Member
    Join Date
    Sep 2016
    Location
    http://unibot.boards.net
    Posts
    2
    Don't know how else to start, so I'll start with FAQ about this tool:

    What is UniBot?
    - UniBot is a unique program that is used for quick and easy creation of HTTP bots, without knowledge of any programming language and without any torment from designing GUI. It can be found here: mikisoft.me/programs/unibot (Virus scan, more analysis here)

    For what is it actually used?
    - You can create whatever thing comes to your mind, but most of them are some simple bots on which you will substantially lose time creating it in some IDE.

    Does that mean I can create any type of bot?
    - Yes, if you are skilled enough. You can create for example bots for voting or commenting, or you can make some bot that will rip out specific content from pages on some site, etc.

    I have opened the program and nothing seems to be clear to me. Care to explain?
    - That's why I decided to make this tutorial because interface of the program looks complicated, but once you begin to understand everything that I have presented in the following, it should be much clearer (at least I hope so).

    So, let's start...

    --- User interface ---

    As you have seen if you've already downloaded and run the program, the interface may seem a little hard to understand, but don't be afraid. The following picture should cover most of the things that you'll need to know:



    index - each index contains of one HTTP request (GET or POST) or/and logical statement(s) (If-Then) or/and public/output string(s)
    strings - that is data which is gathered before or after the execution of the request, depending on where the string is actually used (on this topic I'll write most because it's very important to know)
    If clauses - a place to test strings if they meet certain conditions, and on that basis to decide what next to do (ie. which is next index or to stop the execution of the process)
    results - a place where the string results are shown (if that is enabled in their options)

    --- Indexes ---

    Like I said, indexes must contain at least one request or logical statement for solving, or public/output string. We'll focus on the first.
    As you know, the definition of each HTTP bot is to assemble and send a specific HTTP requests, in order to achieve a specific goal. So in this program there are indexes, that present a separate templates of certain requests by which program is headed. As can be seen, each index can have a name for easier orientation.
    To complete the formation of a HTTP request, there are two important items: POST data and additional headers, which are starting to appear mostly from the second request by gathering the results of the strings. Don't be confused because I only mention HTTP requests - HTTPS is supported, too.

    --- Strings ---

    This is the key point of the program, so you should pay special attention in order to learn to make bots after finishing this.

    We'll begin with the facts:
    - strings usually occur after execution of the first request
    - each string should contain at least one command
    - command that determines what will be the result must be valid and in accordance with the request that was previously sent
    - most of the strings are essential for the continuation of the process
    - they're executed depending on where they are used - before or after sending a request
    - their usage is %name% (where "name" is a name of the string)
    - if it isn't public/output, the string will not be executed if there is no place in the index where it is used


    If you understand this then we go into analysis of a string that contains one command:
    Code:
    'Hey!'+rpl('Hello, world!','world','Miki')
    Now let's analyze its parts:

    'Hey!' - everything that is under a single quotes represents a constant, and this constant is located at the beginning of the string so that will be the first thing printed into it

    + - character for merging a command with a constant, or with an another command

    rpl('Hello, world!','world','Miki') - it can be assumed that this is the command for replacing specific text, so in this case in the text "Hello, world!" it replaces "world" with "Miki"

    The overall result would be:
    Hey!Hello, Miki!
    These are actually some of the most basic things you need to know if you want to go into the world of programming, but I wouldn't call this real programming because you must know a lot more than working with strings. Anyway, moving on...

    If you haven't heard of regular expressions, then you should first look at them because they are very important for the formation of the string result. I will not talk about that, because you have a lot of examples and explanations all over the Internet.
    The basic command for executing them (which looks like previous) is as follows:
    Code:
    rg(source,regex,replacement)
    Example:
    Code:
    rg('Hey!Hello, Miki!',', (.*?)!','$1')
    Result:
    Miki
    Independent commands:
    These are commands that are processed even if they're located in the constants ie. under apostrophes.

    First and most important command is: [src]
    In its place there will be a complete page source (after completing request of course), with response headers at the beginning.

    Second important command is: [nl]
    Considering that the commands and the constants are written only in one line, I had to find a way to print the constants in multiple lines, so in place of this command a new line separator will be printed.

    Third: [rnd]
    In its place will be put random generated characters (upper and/or lower case letters, numbers and symbols), or a number from a given range.
    To determine the range of characters that will be included, between the last letter and ] you have to add some of these letters:
    U - since the default setting is to include only lowercase letters, this command specifies that only uppercase letters are considered
    M - mixed-case: mixed uppercase and lowercase letters
    L - includes only letters
    D - includes only numbers
    S - includes only symbols
    The last three letters that define a range of characters can be combined, so we have the following example to generate random email addresses:
    '[rndLD]@gmail.com'
    Result would be:
    6g4fog9bdl1fajn@gmail.com
    As you can see, there is a default number of characters to be printed, and it's 15. To change this, again at the end we add number of characters that we want to be printed:
    '[rndLD8]@gmail.com'
    Result:
    q6pxd1hp@gmail.com
    As I mentioned above, there is another thing about this command - and that is to generate a random number from the specified range. Its usage is very simple:
    Code:
    '[rnd5-10]'
    Obviously, this will generate some number between 5 and 10.

    Fourth: [inp]
    In the place of this command will be the user input, which usage is equivalent to the command above (except the U and M letters that are unnecessary in this case), so I will not say anything more about this.

    String options:
    After defining the string, the button next to it ("...") will be enabled which represent the options for that string. Click on it to get the following little window, where we choose which options will be used:

    Crucial - it is important for the continuation of the process
    Public - it is available in the other indexes for modification and usage
    Array - after processing the string, if more than one result occurs (when using regex or input), this option applies the template to each of them separately (by making sub-threads); if this option is disabled then only the first result will be used
    Output - this is the option that will show the string results in the main window

    --- If clauses ---

    The next are If clauses, which of course are not required if there is a HTTP request in a given index. If both are included, then the request will be executed first with all the strings that are with it, and then the If clauses with its strings. (After that the public and output strings that haven't been put in the HTTP request nor the If clauses will be executed.)
    It is a simple principle of making them, so everyone could understand it without explanation (even better if he knows the mathematical logic, ie. the basics of programming). What I will mention is the operation depending on the results of an entire If clause, which will of course be one of the two possible outcomes - in the case where the If clause is true and the case where it is false. For the both cases, the options are the same.
    We see on the right side option "Change proxy" - if the seconds to wait are not defined, it changes current to the next proxy address before proceeding to the next index ("Go to") or finishing process ("Finish"). If there is no available proxy address and the seconds are defined, then the process will not be stopped because seconds to wait will be chosen as alternative.

    And that's it.

    (For more, go here: mikisoft.me/programs/unibot-walkthrough/#additional)
    Last edited by MikiSoft; 09-12-2016 at 12:22 PM.
    Reply With Quote  
     

  2. #2  
    That's a pretty good work right there man
    Reply With Quote  
     

  3. #3  
    Administrator Nat's Avatar
    Join Date
    Aug 2015
    Location
    USA
    Posts
    488
    Hey MikiSoft, thanks for joining us! Looks like you've done a solid job with your program. Generally any piece of content that is copy and pasted from another site is removed from CN -- we prefer that you write unique content. However, it doesn't look like this is something you're spamming on lots of public websites and its a cool program so I'll leave it up. I'd love to see you active on CN posting some programs or techniques or tutorials.
    Need a reason to be active on CN?

    Newbies - Get started in affiliate marketing here. Then start generating traffic.

    "You must understand that there is more than one path to the top of the mountain..." - The Book of Five Rings
    Reply With Quote  
     

  4. #4  
    Junior Member
    Join Date
    Sep 2016
    Location
    http://unibot.boards.net
    Posts
    2
    Thank you both, especially you admin for respecting my work by not treating it as spam, and therefore by giving an opportunity to everyone here to know and learn something about UniBot!

    P.S. The tool's source code was released this year, so anyone who wants can continue with its development.
    Last edited by MikiSoft; 09-12-2016 at 12:08 PM.
    Reply With Quote  
     

  5. #5  
    Administrator Nat's Avatar
    Join Date
    Aug 2015
    Location
    USA
    Posts
    488
    Wonderful! I love that you've shared the source code publicly on GitHub.
    Need a reason to be active on CN?

    Newbies - Get started in affiliate marketing here. Then start generating traffic.

    "You must understand that there is more than one path to the top of the mountain..." - The Book of Five Rings
    Reply With Quote  
     

Tags for this Thread

View Tag Cloud

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •